HYPRASTRIP B 604 is an immersion paint stripper for ferrous metals. This alkaline stripper is used as a hot-bath immersion. It must not be used on light alloys made of aluminium, zinc and copper, as this is a highly-alkaline immersion stripper. It is specifically recommended for difficult cases where thick or very resistant paints must be stripped.
HYPRASTRIP B604 is designed for stripping ferrous metals. Do not use on light alloys made of aluminium, zinc and copper, as it is highly alkaline. HYPRASTRIP B604 is specifically recommended for difficult cases where thick or very resistant paints must be stripped.
This alkaline stripper must be 40-100% diluted with water. The time it takes to work ranges from 1 to 3 hours, based on the thickness and type of coating.
Step 1
HYPRASTRIP B604 must be 40-100% diluted with water.
Step 2
Fill the bath with product.
Step 3
Soak the parts to be stripped in the bath.
Step 4
Leave to work. Then, once the paint has completely broken down, rinse thoroughly with a high-pressure washer.
HYPRASTRIP B604 is a high-performance stripper specifically developed for immersion stripping of ferrous metals. Specially designed for use in a hot bath, this alkaline stripper offers maximum efficiency. However, please note that due to the high alkaline immersion flux, it is not suitable for light metal alloys, notably aluminum, zinc and copper.
HYPRASTRIP B604 is the perfect solution for the most difficult situations where thick or extremely resistant paint needs to be removed. Its powerful, concentrated formula effectively attacks and removes stubborn coatings, leaving ferrous metals ready for further treatment. HYPRASTRIP B604 is simple and effective to use. All you have to do is dip the workpiece to be treated in a hot bath of paint stripper and leave it to stand for the appropriate length of time. During this time, the alkaline stripper penetrates the various layers of paint, dissolving them and separating them from the substrate. This powerful action ensures complete and effective exfoliation even in the most complex cases.
It's important to note that safety is paramount when using chemical strippers. Always follow instructions, wear appropriate protective equipment and handle the product in a well-ventilated area.
Choose HYPRASTRIP B604 for efficient, reliable stripping of ferrous metals. With its special formulation and ability to remove stubborn coatings, this immersion stripper delivers excellent results even in the toughest conditions.
SCALPEX A1 is a hot, immersion, engine paint-stripper and descaler for steel and cast-iron. This hot-bath stripper is used for descaling and stripping paints, as well as removing metal oxide on steel and cast iron. This immersion, degreasing descaler and stripper, does not harm heat-resistant steels and cast iron. SCALPEX A1, immersion stripper, attacks aluminium, copper and zinc alloys.
DECAPEINT is a wood and metal immersion stripper for unbaked paints. This hot-bath stripper has a so-called “destructive” formula, composed of sodium hydroxide, alkaline salts and surfactants. It strips paints (glycerophtalic, vinyl and acrylic paint, primers) from wood and ferrous-metal substrates. This immersion stripper for unbaked paints must be diluted with water and used as a bath heated at between 20 and 40 °C.
SCALPIK L 400 is a hot-bath, immersion, liquid stripper. It removes epoxy, polyester, acrylic, vinyl and E-coat paints, certain varnishes, as well as all unbaked paints found on ferrous and non-ferrous metals. This innovative product is chlorinated-solvent-free and is the ideal substitute for methylene-chloride-based liquid strippers.
SCALPIK DP 283 NG is a hot-bath paint stripper for all substrates. It is composed of biodegradable, low-volatility solvents. This hot-bath stripper for all substrates works on a large number of paints (epoxy, epoxy-polyester, polyester, glycerophtalic, electrophoretic silicone, vinyl, acrylic paint etc.). This immersion stripper dissolves the resins and disperses the pigments found in paint. The film of paint that has been broken down by SCALPIK DP 283 NG is removed by rinsing with pressurised water. This composition does not attack such supports as steel and aluminium.
To download the data sheet, please enter your e-mail address to access the document.
EN 
FR 
ES 
DE 
PL 
NL 
